Electrical

Licensed electrical work, done to standard.

From a single powerpoint to a full switchboard upgrade. Safe, compliant work for Brisbane homes and small business, handled personally by Hoff.

Licensed electrical contractor ARCtick certified Fully insured Paddington-based, servicing Brisbane Compliance certificate on completion

What Hoff does

Electrical services.

The electrical jobs Brisbane homes ask for most. Every one quoted in writing, tested on completion and certified.

Switchboard upgrades

Switchboard upgrades for Brisbane homes by a licensed electrical contractor. Ceramic fuses replaced, safety switches fitted, board tested and certified on completion.

View service

Electrical fault finding

Tripping circuits, dead powerpoints and flickering lights diagnosed by a licensed Brisbane electrician. The cause is traced and explained before anything is replaced.

View service

Lighting installation

LED downlights, pendants, strip lighting and outdoor lighting installed by a licensed Brisbane electrician. Layouts set out properly and cable runs planned to minimise patching.

View service

Powerpoint installation

Extra powerpoints, USB outlets and outdoor power installed by a licensed Brisbane electrician. Positions planned around how the room is used, and cable runs kept tidy.

View service

Ceiling fan installation

Ceiling and exhaust fans supplied and installed by a licensed Brisbane electrician. Mounted level, balanced to run quiet, and wired with proper speed or remote control.

View service

Smoke alarm installation

Photoelectric and interconnected smoke alarms installed by a licensed Brisbane electrician. Positions set out per the room layout, wired, interconnected and tested.

View service

EV charger installation

Home EV charger installation in Brisbane by a licensed electrical contractor. Supply capacity checked, wall box wired to spec, circuit protected, tested and certified.

View service

Safety switch installation

Safety switches and RCDs fitted to Brisbane home circuits by a licensed electrical contractor. Tested on completion and certified, with the cause of any tripping traced first.

View service

Electrical safety inspections

Pre-purchase and rental electrical safety inspections across Brisbane, with a clear written report from a licensed electrical contractor. No pressure to book the repairs.

View service

Dedicated appliance circuits

Dedicated circuits for ovens, cooktops, air-conditioning and other high-draw appliances in Brisbane homes. Sized correctly, protected at the board and certified.

View service

Cooktop and oven installation

Electric cooktops and ovens connected in Brisbane kitchens by a licensed electrician. Circuit checked and sized, appliance connected, tested and certified.

View service

Exhaust fan installation

Bathroom and laundry exhaust fans installed and ducted properly in Brisbane homes. Vented outside rather than into the roof space, wired and tested by a licensed electrician.

View service

Outdoor lighting installation

Patio, path, garden and entry lighting installed across Brisbane using fittings rated for outdoor conditions. Wired, weatherproofed, tested and certified.

View service

Security lighting installation

Sensor and floodlighting installed across Brisbane homes. Positioned and aimed to cover approaches without lighting up your own bedroom or the neighbours.

View service

All services

Surface-mounted downlights and a smoke alarm installed in a Brisbane hallway

Done to standard

Safety you can't see is still the part that matters.

Most of an electrical job is hidden behind a wall or inside a board. That is exactly why the parts you never see get the same care as the parts you do.

Tested and certified
Every circuit is tested on completion and you receive the required certificate of compliance.
Neat cable runs
Runs are planned to minimise patching, with fixings and terminations done to standard, not just made to work.
Explained in plain English
Hoff shows you what was found, what was done and what to keep an eye on. No jargon, no upselling.

Start to handover

How an electrical job runs.

  1. 01

    Understand the issue

    What is happening, when it started, and which parts of the property it affects.

  2. 02

    Inspect and confirm

    Hoff looks at the board, the circuit and the fittings before putting a price on anything.

  3. 03

    Quote the agreed work

    An itemised price for the scope you have both agreed. Nothing starts until you approve it.

  4. 04

    Install or repair

    Cable runs planned to minimise patching, with fixings and terminations done to standard.

  5. 05

    Test the circuit

    Every circuit worked on is tested on completion, and you receive the required certificate.

  6. 06

    Explain and hand over

    What was found, what was done, and anything worth keeping an eye on. No jargon.

Where Hoff works

Electrical service areas.

Based in Paddington, covering greater Brisbane. Suburb pages below, or see the full list.

Electrical questions.

A tripping safety switch usually means a genuine fault somewhere on the circuit, not a faulty switch. Hoff will isolate the circuit, find the cause and explain what it will take to fix before doing the work.

Get the electrical work priced.

Send the job and a photo. Hoff quotes it in writing before anything starts.

Call Hoff Request a Quote