Electrical
Powerpoint installation in Brisbane
Most older Brisbane homes were wired for a fraction of the number of things a household now plugs in. The usual result is a double outlet behind a couch running a powerboard chain, which is both inconvenient and a genuine load and safety issue.
- Licence 90673
- ARCtick L169731
- Fully insured
Adding outlets is straightforward work when it is planned properly. The variables are where the existing circuit runs, how much spare capacity it has, and how the cable gets to the new position without unnecessary patching.
What it covers
What's included.
Additional outlets
New single and double outlets added to existing circuits where capacity allows.
Outlet relocation
Moving an outlet that ended up behind furniture, joinery or an appliance.
USB and smart outlets
Combination outlets with integrated USB, and switched outlets for controlled appliances.
Outdoor and weatherproof outlets
Rated outlets for patios, garages, sheds and garden areas.
Dedicated circuits
Where an appliance needs its own circuit rather than sharing one, that is identified before installation.
Testing and certification
Circuits tested on completion with the required certificate issued.
Why people call
Common reasons for this job.
- Powerboards and double adaptors are being used permanently
- There is no outlet where the desk, bed or TV actually sits
- A renovation or new kitchen changes where power is needed
- An appliance keeps tripping the circuit it shares
- There is no weatherproof power outside for tools or entertaining
- An outlet is damaged, loose in the wall or discoloured
How Hoff works
The approach.
Hoff looks at where you actually want to use power, not just where an outlet is easy to install. A point in a slightly better position is worth the extra ten minutes of cable.
Whether a new outlet can join an existing circuit depends on what else is on it. If the circuit is already loaded, that gets raised at quoting stage rather than becoming a tripping problem later.
Cable routes are chosen to keep patching down. In a single-storey home with roof access this is usually simple; in a slab-on-ground or two-storey it takes more planning and you will be told what is involved.
Adding or altering outlets is electrical work requiring a licensed electrical contractor. Work is tested on completion and certified.
Suitable for
Where this comes up.
Recent work
Related projects.
Powerpoints questions.
More than older wiring standards assumed. A modern bedroom or living area is usually better with outlets on more than one wall so furniture placement is not dictated by a single point. Hoff will work through the room with you.
Often yes, provided the circuit has capacity for the additional load. If it does not, a dedicated circuit is the right answer and that will be explained before the work is quoted.
Some appliances do, particularly higher-draw ones. Hoff will identify that at the quoting stage rather than after the circuit starts tripping.
Yes, using outlets rated for outdoor exposure, in positions that stay serviceable in Brisbane weather.
It depends on the construction and the route. You will be told what patching is likely before the job starts.
Send Hoff the powerpoints details.
Describe the job in plain words and Hoff will come back to you personally with a written price.