Electrical
Smoke alarm installation in Brisbane
Queensland has specific smoke alarm requirements covering alarm type, placement and interconnection, and they differ depending on whether a dwelling is owner-occupied, leased, sold or newly built. Getting the detail right matters, because a compliant alarm in the wrong position is still not doing its job.
- Licence 90673
- ARCtick L169731
- Fully insured
Hoff installs photoelectric alarms, interconnects them so that one alarm triggers all of them, and sets out positions based on the actual layout of the home.
What it covers
What's included.
Placement assessment
Where alarms are needed based on bedrooms, hallways, storeys and the layout of the dwelling.
Photoelectric alarms
Supply and install of photoelectric alarms.
Interconnection
Alarms interconnected so that one detecting smoke sounds all of them.
Hardwired installation
Mains-powered alarms wired to a suitable circuit with backup.
Replacing expired alarms
Alarms past their service life removed and replaced.
Testing and handover
Every alarm tested on completion and the system explained to you.
Why people call
Common reasons for this job.
- Existing alarms are past their expiry date
- The house has alarms that are not interconnected
- A property is being sold or leased
- A renovation or extension changes the layout
- An alarm chirps, false-alarms or will not silence
- There is no alarm in or near a bedroom
How Hoff works
The approach.
Placement is worked out from the plan of the house, not by putting one alarm in the hallway and calling it done. Bedrooms, the paths between bedrooms and the exit, and each storey all factor in.
Interconnection is the part people most often lack. An alarm at the far end of the house going off on its own may not wake someone in a bedroom with the door shut, which is the entire reason interconnection exists.
Every alarm is tested before Hoff leaves and you are shown how to test and maintain them yourself.
Queensland smoke alarm legislation sets requirements for alarm type, placement and interconnection, and the obligations differ for owner-occupied, leased, sold and newly built dwellings, with staged compliance dates. Check your specific obligation with Queensland Fire Department at qfes.qld.gov.au or via the Queensland Government website rather than relying on a summary.
Suitable for
Where this comes up.
Recent work
Related projects.
Smoke alarms questions.
Queensland requirements specify photoelectric alarms meeting the relevant Australian Standard, with interconnection between alarms. The obligations differ depending on whether the dwelling is owner-occupied, leased, sold or new, so it is worth confirming your specific situation with the Queensland Government.
When one alarm detects smoke, every alarm in the dwelling sounds. It matters most at night, when a single alarm at the other end of the house may not wake someone behind a closed bedroom door.
Alarms have a service life marked on the unit and should be replaced by that date. If you cannot find a date on yours, Hoff can check it while he is there.
A regular short chirp is usually a low backup battery or an alarm reaching end of life. If replacing the battery does not resolve it, the unit itself is likely due.
Yes. It is common to add or replace alarms during a lighting job or a switchboard upgrade, which saves a separate visit.
Related
Other services.
Send Hoff the smoke alarms details.
Describe the job in plain words and Hoff will come back to you personally with a written price.